UEFI boot: how does that actually work, then?

It’s AdamW Essay Time again! If you’re looking for something short and snappy, look elsewhere.

Kamil Paral kindly informs me I’m a chronic sufferer of Graphomania. Always nice to know what’s wrong with you.

IMPORTANT NOTE TO INDUSTRY FOLKS: This blog post is aimed at regular everyday folks; it’s intended to dispel a few common myths and help regular people understand UEFI a bit better. It is not a low-level fully detailed and 100% technically accurate explanation, and I’m not a professional firmware engineer or anything like that. If you’re actually building an operating system or hardware or something, please don’t rely on my simplified explanations or ask me for help; I’m just an idiot on the internet. If you’re doing that kind of thing and you have money, join the UEFI Forum or ask your suppliers or check your reference implementation or whatever. If you don’t have money, try asking your peers with more experience, nicely. END IMPORTANT NOTE

You’ve probably read a lot of stuff on the internet about UEFI. Here is something important you should understand: 95% of it was probably garbage. If you think you know about UEFI, and you derived your knowledge anywhere other than the UEFI specifications, mjg59’s blog or one of a few other vaguely reliable locations/people – Rod Smith, or Peter Jones, or Chris Murphy, or the documentation of the relatively few OSes whose developers actually know what the hell they’re doing with UEFI – what you think you know is likely a toxic mix of misunderstandings, misconceptions, half-truths, propaganda and downright lies. So you should probably forget it all.

Good, now we’ve got that out of the way. What I mostly want to talk about is bootloading, because that’s the bit of firmware that matters most to most people, and the bit news sites are always banging on about and wildly misunderstanding.


First, let’s get some terminology out of the way. Both BIOS and UEFI are types of firmware for computers. BIOS-style firmware is (mostly) only ever found on IBM PC compatible computers. UEFI is meant to be more generic, and can be found on systems which are not in the ‘IBM PC compatible’ class.

You do not have a ‘UEFI BIOS’. No-one has a ‘UEFI BIOS’. Please don’t ever say ‘UEFI BIOS’. BIOS is not a generic term for all PC firmware, it is a particular type of PC firmware. Your computer has a firmware. If it’s an IBM PC compatible computer, it’s almost certainly either a BIOS or a UEFI firmware. If you’re running Coreboot, congratulations, Mr./Ms. Exception. You may be proud of yourself.

Secure Boot is not the same thing as UEFI. Do not ever use those terms interchangeably. Secure Boot is a single effectively optional element of the UEFI specification, which was added in version 2.2 of the UEFI specification. We will talk about precisely what it is later, but for now, just remember it is not the same thing about UEFI. You need to understand what Secure Boot is, and what UEFI is, and which of the two you are actually talking about at any given time. We’ll talk about UEFI first, and then we’ll talk about Secure Boot as an ‘extension’ to UEFI, because that’s basically what it is.

Bonus Historical Note: UEFI was not invented by, is not controlled by, and has never been controlled by Microsoft. Its predecessor and basis, EFI, was developed and published by Intel. UEFI is managed by the UEFI Forum. Microsoft is a member of the UEFI forum. So is Red Hat, and so is Apple, and so is just about every major PC manufacturer, Intel (obviously), AMD, and a laundry list of other major and minor hardware, software and firmware companies and organizations. It is a broad consensus specification, with all the messiness that entails, some of which we’ll talk about specifically later. It is no one company’s Evil Vehicle Of Evilness.


If you really want to understand UEFI, it’s a really good idea to go and read the UEFI specification. You can do this. It’s very easy. You don’t have to pay anyone any money. I am not going to tell you that reading it will be the most fun you’ve ever had, because it won’t. But it won’t be a waste of your time. You can find it right here on the official UEFI site. You have to check a couple of boxes, but you are not signing your soul away to Satan, or anything. It’s fine. As I write this, the current version of the spec is 2.4 Errata A, and that’s the version this post is written with regard to.

There is no BIOS specification. BIOS is a de facto standard – it works the way it worked on actual IBM PCs, in the 1980s. That’s kind of one of the reasons UEFI exists.

Now, to keep things simple, let’s consider two worlds. One is the world of IBM PC compatible computers – hereafter referred to just as PCs – before UEFI and GPT (we’ll come to GPT) existed. This is the world a lot of you are probably familiar with and may understand quite well. Let’s talk about how booting works on PCs with BIOS firmware.

BIOS booting

It works, in fact, in a very, very simple way. On your bog-standard old-skool BIOS PC, you have one or more disks which have an MBR. The MBR is another de facto standard; basically, the very start of the disk describes the partitions on the disk in a particular format, and contains a ‘boot loader’, a very small piece of code that a BIOS firmware knows how to execute, whose job it is to boot the operating system(s). (Modern bootloaders frequently are much bigger than can be contained in the MBR space and have to use a multi-stage design where the bit in the MBR just knows how to load the next stage from somewhere else, but that’s not important to us right now).

All a BIOS firmware knows, in the context of booting the system, is what disks the system contains. You, the owner of this BIOS-based computer, can tell the BIOS firmware which disk you want it to boot the system from. The firmware has no knowledge of anything beyond that. It executes the bootloader it finds in the MBR of the specified disk, and that’s it. The firmware is no longer involved in booting.

In the BIOS world, absolutely all forms of multi-booting are handled above the firmware layer. The firmware layer doesn’t really know what a bootloader is, or what an operating system is. Hell, it doesn’t know what a partition is. All it can do is run the boot loader from a disk’s MBR. You also cannot configure the boot process from outside of the firmware.

UEFI booting: background

OK, so we have our background, the BIOS world. Now let’s look at how booting works on a UEFI system. Even if you don’t grasp the details of this post, grasp this: it is completely different. Completely and utterly different from how BIOS booting works. You cannot apply any of your understanding of BIOS booting to native UEFI booting. You cannot make a little tweak to a system designed for the world of BIOS booting and apply it to native UEFI booting. You need to understand that it is a completely different world.

Here’s another important thing to understand: many UEFI firmwares implement some kind of BIOS compatibility mode, sometimes referred to as a CSM. Many UEFI firmwares can boot a system just like a BIOS firmware would – they can look for an MBR on a disk, and execute the boot loader from that MBR, and leave everything subsequently up to that bootloader. People sometimes incorrectly refer to using this feature as ‘disabling UEFI’, which is linguistically nonsensical. You cannot ‘disable’ your system’s firmware. It’s just a stupid term. Don’t use it, but understand what people really mean when they say it. They are talking about using a UEFI firmware’s ability to boot the system ‘BIOS-style’ rather than native UEFI style.

What I’m going to describe is native UEFI booting. If you have a UEFI-based system whose firmware has the BIOS compatibility feature, and you decide to use it, and you apply this decision consistently, then as far as booting is concerned, you can pretend your system is BIOS-based, and just do everything the way you did with BIOS-style booting. If you’re going to do this, though, just make sure you do apply it consistently. I really can’t recommend strongly enough that you do not attempt to mix UEFI-native and BIOS-compatible booting of permanently-installed operating systems on the same computer, and especially not on the same disk. It is a terrible terrible idea and will cause you heartache and pain. If you decide to do it, don’t come crying to me.

For the sake of sanity, I am going to assume the use of disks with a GPT partition table, and EFI FAT32 EFI system partitions. Depending on how deep you’re going to dive into this stuff you may find out that it’s not strictly speaking the case that you can always assume you’ll be dealing with GPT disks and EFI FAT32 ESPs when dealing with UEFI native boot, but the UEFI specification is quite strongly tied to GPT disks and EFI FAT32 ESPs, and this is what you’ll be dealing with in 99% of cases. Unless you’re dealing with Macs, and quite frankly, screw Macs.

Edit note: the following sections (up to Implications and Complications) were heavily revised on 2014-01-26, a few hours after the initial version of this post went up, based on feedback from Peter Jones. Consider this to be v2.0 of the post. An earlier version was written in a somewhat less accurate and more confusing way.

UEFI native booting: how it actually works – background

OK, with that out of the way, let’s get to the meat. This is how native UEFI booting actually works. It’s probably helpful to go into this with a bit of high-level background.

UEFI provides much more infrastructure at the firmware level for handling system boot. It’s nowhere near as simple as BIOS. Unlike BIOS, UEFI certainly does understand, to varying degrees, the concepts of ‘disk partitions’ and ‘bootloaders’ and ‘operating systems’.

You can sort of look at the BIOS boot process, and look at the UEFI process, and see how the UEFI process extends various bits to address specific problems.

The BIOS/MBR approach to finding the bootloader is pretty janky, when you think about it. It’s very ‘special sauce’: this particular tiny space at the front of the disk contains magic code that only really makes much sense to the system firmware and special utilities for writing it. There are several problems with this approach.

  • It’s inconvenient to deal with – you need special utilities to write the MBR, and just about the only way to find out what’s in one is to dd the contents out and examine them.
  • As noted above, the MBR itself is not big enough for many modern bootloaders. What they do is install a small part of themselves to the MBR proper, and the rest to the empty space on the disk between where the conventional MBR ends and the first partition begins. There’s a rather big problem with this (well, the whole design is a big problem, but never mind), which is that there’s no reliable convention for where the first partition should begin, so it’s difficult to be sure there’ll be enough space. One thing you usually can rely on is that there won’t be enough space for some bootloader configurations.
  • The design doesn’t provide any standardized layer or mechanism for selecting boot targets other than disks…but people want to select boot targets other than disks. i.e. they want to have multiple bootable ‘things’ – usually operating systems – per disk. The only way to do this, in the BIOS/MBR world, is for the bootloaders to handle it; but there’s no widely accepted convention for the right way to do this. There are many many different approaches, none of which is particularly interoperable with any of the others, none of which is a widely accepted standard or convention, and it’s very difficult to write tooling at the OS / OS installation layer that handles multiboot cleanly. It’s just a very messy design.
  • The design doesn’t provide a standard way of booting from anything except disks. We’re not going to really talk about that in this article, but just be aware it’s another advantage of UEFI booting: it provides a standard way for booting from, for instance, a remote server.
  • There’s no mechanism for levels above the firmware to configure the firmware’s boot behaviour.

So you can imagine the UEFI Elves sitting around and considering this problem, and coming up with a solution. Instead of the firmware only knowing about disks and one ‘magic’ location per disk where bootloader code might reside, UEFI has much more infrastructure at the firmware layer for handling boot loading. Let’s look at all the things it defines that are relevant here.

EFI executables

The UEFI spec defines an executable format and requires all UEFI firmwares be capable of executing code in this format. When you write a bootloader for native UEFI, you write in this format. This is pretty simple and straightforward, and doesn’t need any further explanation: it’s just a Good Thing that we now have a firmware specification which actually defines a common format for code the firmware can execute.

The GPT (GUID partition table) format

The GUID Partition Table format is very much tied in with the UEFI specification, and again, this isn’t something particularly complex or in need of much explanation, it’s just a good bit of groundwork the spec provides. GPT is just a standard for doing partition tables – the information at the start of a disk that defines what partitions that disk contains. It’s a better standard for doing this than MBR/’MS-DOS’ partition tables were in many ways, and the UEFI spec requires that UEFI-compliant firmwares be capable of interpreting GPT (it also requires them to be capable of interpreting MBR, for backwards compatibility). All of this is useful groundwork: what’s going on here is the spec is establishing certain capabilities that everything above the firmware layer can rely on the firmware to have.

EFI system partitions

I actually really wrapped my head around the EFI system partition concept while revising this post, and it was a great ‘aha!’ moment. Really, the concept of ‘EFI system partitions’ is just an answer to the problem of the ‘special sauce’ MBR space. The concept of some undefined amount of empty space at the start of a disk being ‘where bootloader code lives’ is a pretty crappy design, as we saw above. EFI system partitions are just UEFI’s solution to that.1

The solution is this: we require the firmware layer to be capable of reading some specific types of filesystem. The UEFI spec requires that compliant firmwares be capable of reading the FAT12, FAT16 and FAT32 variants of the FAT format, in essence. In fact what it does is codify a particular interpretation of those formats as they existed at the point UEFI was accepted, and say that UEFI compliant firmwares must be capable of reading those formats. As the spec puts it:

“The file system supported by the Extensible Firmware Interface is based on the FAT file system. EFI defines a specific version of FAT that is explicitly documented and testable. Conformance to the EFI specification and its associate reference documents is the only definition of FAT that needs to be implemented to support EFI. To differentiate the EFI file system from pure FAT, a new partition file system type has been defined.”

An ‘EFI system partition’ is really just any partition formatted with one of the UEFI spec-defined variants of FAT and given a specific GPT partition type to help the firmware find it. And the purpose of this is just as described above: allow everyone to rely on the fact that the firmware layer will definitely be able to read data from a pretty ‘normal’ disk partition. Hopefully it’s clear why this is a better design: instead of having to write bootloader code to the ‘magic’ space at the start of an MBR disk, operating systems and so on can just create, format and mount partitions in a widely understood format and put bootloader code and anything else that they might want the firmware to read there.

The whole ESP thing seemed a bit bizarre and confusing to me at first, so I hope this section explains why it’s actually a very sensible idea and a good design – the bizarre and confusing thing is really the BIOS/MBR design, where the only way for you to write something from the OS layer that you knew the firmware layer could consume was to write it into some (but you didn’t know how much) Magic Space at the start of a disk, a convention which isn’t actually codified anywhere. That really isn’t a very sensible or understandable design, if you step back and take a look at it.

As we’ll note later, the UEFI spec tends to take a ‘you must at least do these things’ approach – it rarely prohibits firmwares from doing anything else. It’s not against the spec to write a firmware that can execute code in other formats, read other types of partition table, and read partitions formatted with filesystems other than the UEFI variants of FAT. But a UEFI compliant firmware must at least do all these things, so if you are writing an OS or something else that you want to run on any UEFI compliant firmware, this is why the EFI system partition concept is so important: it gives you (at least in theory) 100% confidence that you can put an EFI executable on a partition formatted with the UEFI FAT implementation and the correct GPT partition type, and the system firmware will be able to read it. This is the thing you can take to the bank, like ‘the firmware will be able to execute some bootloader code I put in the MBR space’ was in the BIOS world.

So now we have three important bits of groundwork the UEFI spec provides: thanks to these requirements, any other layer can confidently rely on the fact that the firmware:

  • Can read a partition table
  • Can access files in some specific filesystems
  • Can execute code in a particular format

This is much more than you can rely on a BIOS firmware being capable of. However, in order to complete the vision of a firmware layer that can handle booting multiple targets – not just disks – we need one more bit of groundwork: there needs to be a mechanism by which the firmware finds the various possible boot targets, and a way to configure it.

The UEFI boot manager

The UEFI spec defines something called the UEFI boot manager. (Linux distributions contain a tool called efibootmgr which is used to manipulate the configuration of the UEFI boot manager). As a sample of what you can expect to find if you do read the UEFI spec, it defines the UEFI boot manager thusly:

“The UEFI boot manager is a firmware policy engine that can be configured by modifying architecturally defined global NVRAM variables. The boot manager will attempt to load UEFI drivers and UEFI applications (including UEFI OS boot loaders) in an order defined by the global NVRAM variables.”

Well, that’s that cleared up, let’s move on. 😉 No, not really. Let’s translate that to Human. With only a reasonable degree of simplification, you can think of the UEFI boot manager as being a boot menu. With a BIOS firmware, your firmware level ‘boot menu’ is, necessarily, the disks connected to the system at boot time – no more, no less. This is not true with a UEFI firmware.

The UEFI boot manager can be configured – simply put, you can add and remove entries from the ‘boot menu’. The firmware can also (it fact the spec requires it to, in various cases) effectively ‘generate’ entries in this boot menu, according to the disks attached to the system and possibly some firmware configuration settings. It can also be examined – you can look at what’s in it.

One rather great thing UEFI provides is a mechanism for doing this from other layers: you can configure the system boot behaviour from a booted operating system. You can do all this by using the efibootmgr tool, once you have Linux booted via UEFI somehow. There are Windows tools for it too, but I’m not terribly familiar with them. Let’s have a look at some typical efibootmgr output, which I stole and slightly tweaked from the Fedora forums:

[root@system directory]# efibootmgr -v
BootCurrent: 0002
Timeout: 3 seconds
BootOrder: 0003,0002,0000,0004
Boot0000* CD/DVD Drive  BIOS(3,0,00)
Boot0001* Hard Drive    HD(2,0,00)
Boot0002* Fedora        HD(1,800,61800,6d98f360-cb3e-4727-8fed-5ce0c040365d)File(\EFI\fedora\grubx64.efi)
Boot0003* opensuse      HD(1,800,61800,6d98f360-cb3e-4727-8fed-5ce0c040365d)File(\EFI\opensuse\grubx64.efi)
Boot0004* Hard Drive    BIOS(2,0,00)P0: ST1500DM003-9YN16G        .
[root@system directory]#

This is a nice clean example I stole and slightly tweaked from the Fedora forums. We can see a few things going on here.

The first line tells you which of the ‘boot menu’ entries you are currently booted from. The second is pretty obvious (if the firmware presents a boot menu-like interface to the UEFI boot manager, that’s the timeout before it goes ahead and boots the default entry). The BootOrder is the order in which the entries in the list will be tried. The rest of the output shows the actual boot entries. We’ll describe what they actually do later.

If you boot a UEFI firmware entirely normally, without doing any of the tweaks we’ll discuss later, what it ought to do is try to boot from each of the ‘entries’ in the ‘boot menu’, in the order listed in BootOrder. So on this system it would try to boot the entry called ‘opensuse’, then if that failed, the one called ‘Fedora’, then ‘CD/DVD Drive’, and then the second ‘Hard Drive’.

UEFI native booting: how it actually works – boot manager entries

What does these entries actually mean, though? There’s actually a huge range of possibilities that makes up rather a large part of the complexity of the UEFI spec all by itself. If you’re reading the spec, pour yourself an extremely large shot of gin and turn to the EFI_DEVICE_PATH_PROTOCOL section, but note that this is a generic protocol that’s used for other things than booting – it’s UEFI’s Official Way Of Identifying Devices For All Purposes, used for boot manager entries but also for all sorts of other purposes. Not every possible EFI device path makes sense as a UEFI boot manager entry, for obvious reasons (you’re probably not going to get too far trying to boot from your video adapter). But you can certainly have an entry that points to, say, a PXE server, not a disk partition. The spec has lots of bits defining valid non-disk boot targets that can be added to the UEFI boot manager configuration.

For our purposes, though, lets just consider fairly normal disks connected to the system. In this case we can consider three types of entry you’re likely to come across.

BIOS compatibility boot entries

Boot0000 and Boot0004 in this example are actually BIOS compatibility mode entries, not UEFI native entries. They have not been added to the UEFI boot manager configuration by any external agency, but generated by the firmware itself – this is a common way for a UEFI firmware to implement BIOS compatibility booting, by generating UEFI boot manager entries that trigger a BIOS-compatible boot of a given device. How they present this to the user is a different question, as we’ll see later. Whether you see any of these entries or not will depend on your particular firmware, and its configuration. Each of these entries just gives a name – ‘CD/DVD Drive’, ‘Hard Drive’ – and says “if this entry is selected, boot this disk (where ‘this disk’ is 3,0,00 for Boot0000 and 2,0,00 for Boot0004) in BIOS compatibility mode”.

‘Fallback path’ UEFI native boot entries

Boot0001 is an entry (fictional, and somewhat unlikely, but it’s for illustrative purposes) that tells the firmware to try and boot from a particular disk, and in UEFI mode not BIOS compatibility mode, but doesn’t tell it anything more. It doesn’t specify a particular boot target on the disk – it just says to boot the disk.

The UEFI spec defines a sort of ‘fallback’ path for booting this kind of boot manager entry, which works in principle somewhat like BIOS drive booting: it looks in a standard location for some boot loader code. The details are different, though.

What the firmware will actually do when trying to boot in this way is reasonably simple. The firmware will look through each EFI system partition on the disk in the order they exist on the disk. Within the ESP, it will look for a file with a specific name and location. On an x86-64 PC, it will look for the file \EFI\BOOT\BOOTx64.EFI. What it actually looks for is \EFI\BOOT\BOOT{machine type short-name}.EFI – ‘x64’ is the “machine type short-name” for x86-64 PCs. The other possibilities are BOOTIA32.EFI (x86-32), BOOTIA64.EFI (Itanium), BOOTARM.EFI (AArch32 – that is, 32-bit ARM) and BOOTAA64.EFI (AArch64 – that is, 64-bit ARM). It will then execute the first qualifying file it finds (obviously, the file needs to be in the executable format defined in the UEFI specification).

This mechanism is not designed for booting permanently-installed OSes. It’s more designed for booting hotpluggable, device-agnostic media, like live images and OS install media. And this is indeed what it’s usually used for. If you look at a UEFI-capable live or install medium for a Linux distribution or other OS, you’ll find it has a GPT partition table and contains a FAT-formatted partition at or near the start of the device, with the GPT partition type that identifies it as an EFI system partition. Within that partition there will be a \EFI\BOOT directory with at least one of the specially-named files above. When you boot a Fedora live or install medium in UEFI-native mode, this is the mechanism that is used. The BOOTx64.EFI (or whatever) file handles the rest of the boot process from there, booting the actual operating system contained on the medium.

Full UEFI native boot entries

Boot0002 and Boot0003 are ‘typical’ entries for operating systems permanently installed to permanent storage devices. These entries show us the full power of the UEFI boot mechanism, by not just saying “boot from this disk”, but “boot this specific bootloader in this specific location on this specific disk”, using all the ‘groundwork’ we talked about above.

Boot0002 is a boot entry produced by a UEFI-native Fedora installation. Boot0003 is a boot entry produced by a UEFI-native OpenSUSE installation. As you may be able to tell, all they’re saying is “load this file from this partition”. The partition is the HD(1,800,61800,6d98f360-cb3e-4727-8fed-5ce0c040365d) bit: that’s referring to a specific partition (using the EFI_DEVICE_PATH_PROTOCOL, which I’m really not going to attempt to explain in any detail – you don’t necessarily need to know it, if you interact with the boot manager via the firmware interface and efibootmgr). The file is the File(\EFI\opensuse\grubx64.efi) bit: that just means “load the file in this location on the partition we just described”. The partition in question will almost always be one that qualifies as an EFI system partition, because of the considerations above: that’s the type of partition we can trust the firmware to be able to access.

This is the mechanism the UEFI spec provides for operating systems to make themselves available for booting: the operating system is intended to install a bootloader which loads the OS kernel and so on to an EFI system partition, and add an entry to the UEFI boot manager configuration with a name – obviously, this will usually be derived from the operating system’s name – and the location of the bootloader (in EFI executable format) that is intended for loading that operating system.

Linux distributions use the efibootmgr tool to deal with the UEFI boot manager. What a Linux distribution actually does, so far as bootloading is concerned, when you do a UEFI native install is really pretty simple: it creates an EFI system partition if one does not already exist, installs an EFI boot loader with an appropriate configuration – often grub2-efi, but there are others – into a correct path in the EFI system partition, and calls efibootmgr to add an appropriately-named UEFI boot manager entry pointing to its boot loader. Most distros will use an existing EFI system partition if there is one, though it’s perfectly valid to create a new one and use that instead: as we’ve noted, UEFI is a permissive spec, and if you follow the design logically, there’s really no problem with having just as many EFI system partitions as you want.

Configuring the boot process (the firmware UI)

The above describes the basic mechanism the UEFI spec defines that manages the UEFI boot process. It’s important to realize that your firmware user interface may well not represent this mechanism very clearly. Unfortunately, the spec intentionally refrains from defining how the boot process should be represented to the user or how the user should be allowed to configure it, and what that means – since we’re dealing with firmware engineers – is that every firmware does it differently, and some do it insanely.

Many firmwares do have fairly reasonable interfaces for boot configuration. A good firmware design will at least show you the boot order, with a reasonable representation of the entries on it, and let you add or remove entries, change the order, or override the order for a specific boot (by changing it just for that boot, or directly instructing the firmware to boot a particular menu entry, or even giving you the option to simply say “boot this disk”, either in BIOS compatibility mode or UEFI ‘fallback’ mode – my firmware does this). Such an interface will often show ‘full’ UEFI native boot entries (like the Fedora and openSUSE examples we saw earlier) only by their name; you have to examine the efibootmgr -v output to know precisely what these entries will actually try and do when invoked.

Some firmwares try to abstract and simplify the configuration, and may do a good or a bad job of it. For instance, if you have an option to ‘enable or disable’ BIOS compatibility mode, what it’ll really likely do is configure whether the firmware adds BIOS compatibility entries for attached drives to the UEFI boot manager configuration or not. If you have an option to ‘enable or disable’ UEFI native booting, what likely really happens when you ‘disable’ it is that the firmware changes the UEFI boot manager configuration to leave all UEFI-native entries out of the BootOrder.

The key point to remember is that any configuration option inside your firmware interface which is to do with booting is really, behind the scenes, configuring the behaviour of the UEFI boot manager. If you understand all the stuff we’ve discussed above, you may well find it easier to figure out what’s really happening when you twiddle the knobs your firmware interface exposes.

In the BIOS world, you’ll remember, you don’t always find that systems are configured to try and boot from removable drives – CD, USB – before booting from permanent drives. Some are, and some aren’t. Some will try CD before the hard disks, but not USB. People have got fairly used to having to check the BIOS configuration to ensure the boot order is ‘correct’ when trying to install a new operating system.

This applies to the UEFI world too, but because of the added flexibility/complexity of the UEFI boot manager mechanism, it can look unfamiliar and scary.

If you want to ensure that your system tries to boot from removable devices using the ‘fallback’ mechanism before it tries to boot ‘permanent’ boot entries – as you will want to do if you want to, say, install Fedora – you need this to be the default for your firmware, or you need to be able to tell the firmware this. Depending on your firmware’s interface, you may find there is a ‘menu entry’ for each attached removable device and you just have to adjust the boot order to put it at the top of the list, or you may find that there is the mechanism to directly request ‘UEFI fallback boot of this particular disk’, or you may find that the firmware tries to abstract the configuration somehow. We just don’t know, and that makes writing instructions for this quite hard. But now you broadly understand how things work behind the scenes, you may find it easier to understand your firmware user interface’s representation of that.

Configuring the boot process (from an operating system)

As we’ve noted above, unlike in the BIOS world, you can actually configure the UEFI boot process from the operating system level. If you have an insane firmware, you may have to do this in order to achieve what you want.

You can use the efibootmgr tool mentioned earlier to add, delete and modify entries in the UEFI boot manager configuration, and actually do quite a lot of other stuff with it too. You can change the boot order. You can tell it to boot some particular entry in the list on the next boot, instead of using the BootOrder list (if you or some other tool has configured this to happen, your efibootmgr -v output will include a BootNext item stating which menu entry will be loaded on the next boot). There are tools for Windows that can do this stuff from Windows, too. So if you’re really struggling to manage to do whatever it is you want to do with UEFI boot configuration from your firmware interface, but you can boot a UEFI native operating system of some kind, you may want to consider doing your boot configuration from that operating system rather than from the firmware UI.

So to recap:

  • Your UEFI firmware contains something very like what you think of as a boot menu.
  • You can query its configuration with efibootmgr -v, from any UEFI-native boot of a Linux OS, and also change its configuration with efibootmgr (see the man page for details).
  • This ‘boot menu’ can contain entries that say ‘boot this disk in BIOS compatibility mode’, ‘boot this disk in UEFI native mode via the fallback path’ (which will use the ‘look for BOOT(something).EFI’ method described above), or ‘boot the specific EFI format executable at this specific location (almost always on an EFI system partition)’.
  • The nice, clean design that the UEFI spec is trying to imply is that all operating systems should install a bootloader of their own to an EFI system partition, add entries to this ‘boot menu’ that point to themselves, and butt out from trying to take control of booting anything else.
  • Your firmware UI has free rein to represent this mechanism to you in whatever way it wants, and it may do this well, or it may do this poorly.

Installing operating systems to UEFI-based computers

Let’s have a quick look at some specific consequences of the above that relate to installing operating systems on UEFI computers.

UEFI native and BIOS compatibility booting

Here’s a very very simple one which people sometimes miss:

  • If you boot the installation medium in ‘UEFI native’ mode, it will do a UEFI native install of the operating system: it will try to write an EFI-format bootloader to an EFI system partition, and attempt to add an entry to the UEFI boot manager ‘boot menu’ which loads that bootloader.
  • If you boot the installation medium in ‘BIOS compatibility’ mode, it will do a BIOS compatible install of the operating system: it will try to write an MBR-type bootloader to the magic MBR space on a disk.

This applies (with one minor caveat I’m going to paper over for now) to all OSes of which I’m aware. So you probably want to make sure you understand how, in your firmware, you can choose to boot a removable device in UEFI native mode and how you can choose to boot it in BIOS compatibility mode, and make sure you pick whichever one you actually want to use for your installation.

You really cannot do a completely successful UEFI-native installation of an OS if you boot its installation medium in BIOS compatibility mode, because the installer will not be able to configure the UEFI boot manager (this is only possible when booted UEFI-native).

It is theoretically possible for an OS installer to install the OS in the BIOS style – that is, write a bootloader to a disk’s MBR – after being booted in UEFI native mode, but most of them won’t do this, and that’s probably sensible.

Finding out which mode you’re booted in

It is possible that you might find yourself with your operating system installer booted, and not sure whether it’s actually booted in UEFI native mode or BIOS compatibility mode. Don’t panic! It’s pretty easy to find out which, in a few different ways. One of the easiest is just to try and talk to the UEFI boot manager. If what you have booted is a Linux installer or environment, and you can get to a shell (ctrl-alt-f2 in the Fedora installer, for instance), run efibootmgr -v. If you’re booted in UEFI native mode, you’ll get your UEFI boot manager configuration, as shown above. If you’re booted in BIOS compatibility mode, you’ll get something like this:

Fatal: Couldn't open either sysfs or procfs directories for accessing EFI variables.
Try 'modprobe efivars' as root.

If you’ve booted some other operating system, you can try running a utility native to that OS which tries to talk to the UEFI boot manager, and see if you get sensible output or a similar kind of error. Or you can examine the system logs and search for ‘efi’ and/or ‘uefi’, and you’ll probably find some kind of indication.

Enabling UEFI native boot

To be bootable in UEFI native mode, your OS installation medium must obviously actually comply with all this stuff we’ve just described: it’s got to have a GPT partition table, and an EFI system partition with a bootloader in the correct ‘fallback’ path – \EFI\BOOT\BOOTx64.EFI (or the other names for the other platforms). If you’re having trouble doing a UEFI native boot of your installation medium and can’t figure out why, check that this is actually the case. Notably, when using the livecd-iso-to-disk tool to write a Fedora image to a USB stick, you must pass the --efi parameter to configure the stick to be UEFI bootable.

Forcing BIOS compatibility boot

If your firmware seems to make it very difficult to boot from a removable medium in BIOS compatibility mode, but you really want to do that, there’s a handy trick you can use: just make the medium not UEFI native bootable at all. You can do this pretty easily by just wiping all the EFI system partitions. (Alternatively, if using livecd-iso-to-disk to create a USB stick from a Fedora image, you can just leave out the --efi parameter and it won’t be UEFI bootable). If at that point your firmware refuses to boot it in BIOS compatibility mode, commence swearing at your firmware vendor (if you didn’t already).

Disk formats (MBR vs. GPT)

Here’s another very important consideration:

  • If you want to do a ‘BIOS compatibility’ type installation, you probably want to install to an MBR formatted disk.
  • If you want to do a UEFI native installation, you probably want to install to a GPT formatted disk.

Of course, to make life complicated, many firmwares can boot BIOS-style from a GPT formatted disk. UEFI firmwares are in fact technically required to be able to boot UEFI-style from an MBR formatted disk (though we are not particularly confident that they all really can). But you really should avoid this if at all possible. This consideration is quite important, as it’s one that trips up quite a few people. For instance, it’s a bad idea to boot an OS installer in UEFI native mode and then attempt to install to an MBR formatted disk without reformatting it. This is very likely to fail. Most modern OS installers will automatically reformat the disk in the correct format if you allow them to completely wipe it, but if you try and tell the installer ‘do a UEFI native installation to this MBR formatted disk and don’t reformat it because it has data on it that I care about’, it’s very likely to fail, even though this configuration is technically covered in the UEFI specification. Specifically, Windows and Fedora at least explicitly disallow this configuration.

Checking the disk format

You can use the parted utility to check the format of a given disk:

[adamw@adam Downloads]$ sudo parted /dev/sda
GNU Parted 3.1
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) p                                                                
Model: ATA C300-CTFDDAC128M (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags: 

Number  Start   End    Size   Type     File system  Flags
 1      1049kB  525MB  524MB  primary  ext4         boot
 2      525MB   128GB  128GB  primary               lvm


See that Partition table: msdos? This is an MBR/MS-DOS formatted disk. If it was GPT-formatted, that would say gpt. You can reformat the disk with the other type of partition table by doing mklabel gpt or mklabel msdos from within parted. This will destroy the contents of the disk.

With most OS installers, if you pick a disk configuration that blows away the entire contents of the target disk, the installer will automatically reformat it using the most appropriate configuration for the type of installation you’re doing, but if you want to use an existing disk without reformatting it, you’re going to have to check how it’s formatted and take this into account.

Handling EFI system partition if doing manual partitioning

I can only give authoritative advice for Fedora here, but the gist may be useful for other distros / OSes.

If you allow Fedora to handle partitioning for you when doing a UEFI native installation – and you use a GPT-formatted disk, or allow it to reformat the disk (by deleting all existing partitions) – it will handle the EFI system partition stuff for you.

If you use custom partitioning, though, it will expect you to provide an EFI system partition for the installer to use. If you don’t do this, the installer will complain (with a somewhat confusing error message) and refuse to let you start the installation.

So if you’re doing a UEFI native install and using custom partitioning, you need to ensure that a partition of the ‘EFI system partition’ type is mounted at /boot/efi – this is where Fedora expects to find the EFI system partition it’s using. If there is an existing EFI system partition on the system, just set its mount point to /boot/efi. If there is not an EFI system partition yet, create a partition, set its type to EFI system partition, make it at least 200MB big (500MB is good), and set its mount point to /boot/efi.

A specific example

To boil down the above: if you bought a Windows 8 or later system, you almost certainly have a UEFI native install of Windows to a GPT-formatted disk. This means that if you want to install another OS alongside that Windows install, you almost certainly want to do a UEFI-native installation of your other OS. If you don’t like all this UEFI nonsense and want to go back to the good old world you’re familiar with, you will, I’m afraid, have to blow away the UEFI-native Windows installation, and it would be a good idea to reformat the disk to MBR.

Implications and Complications

So, that’s how UEFI booting works, at least a reasonable approximation. When I describe it like that, it almost all makes sense, right?

However, all is not sweetness and light. There are problems. There always are.

Attentive readers may have noticed that I’ve talked about the UEFI spec providing a mechanism. This is accurate, and important. As the UEFI spec is a ‘broad consensus’ sort of thing, one of its major shortcomings (looked at from a particular perspective) is that it’s nowhere near prescriptive enough.

If you read the UEFI spec critically, its basic approach is to define a set of functions that UEFI compliant firmwares must support. What it doesn’t do a lot of at all is strictly requiring things to be done in any particular way, or not done in any particular way.

So: the spec says that a system firmware must do all the stuff I’ve described above, in order to be considered a UEFI-compliant firmware. The spec, however, doesn’t talk about what operating systems ‘should’ or ‘must’ do at all, and it doesn’t say that firmwares must not support (or no-one may expect them to support, or whatever)…anything at all. If you’re making a UEFI firmware, in other words, you have to support GPT formatted disks, and FAT-formatted EFI system partitions, and you must read UEFI boot manager entries in the standard format, and you must do this and that and the other – but you can also do any other crap you like.

It’s pretty easy to read certain implications from the spec – it carefully sets up this nice mechanism for handling OS (or other ‘bootable thing’) selection at the firmware level, for instance, with the clear implication “hey, it’d be great if all OSes were written to this mechanism”. But the UEFI spec doesn’t require that, and neither does any other widely-respected specification.

So, what happens in the real world is that we wind up with really dumb crap. Apple, for instance, ships at least some Macs with their bootloaders in an HFS+ partition. The spec says a UEFI-compliant firmware must support UEFI FAT partitions with the specific GPT partition type that identifies them as an “EFI system partition”, but it doesn’t say the firmware can’t also recognize some other filesystem type and load a bootloader from that. (Whether you consider such a partition to be an “EFI system partition” or not is an interesting philosophical conundrum, but let’s skate right over that for now).

The world would pretty clearly be a better place if everyone just damn well used the EFI system partition format the spec goes to such great pains to define, but Apple is Apple and we can’t have nice things, so Apple went right ahead and wrote firmwares that also can read and load code from HFS+ partitions, and now everyone else has to deal with that or tell Macs to go and get boned. Apple also goes quite a long way beyond the spec in its boot process design, and if you want your alternative OS to show up on its graphical boot menu with a nice icon and things, you have to do more than what the UEFI spec would suggest.

There are various similar incredibly annoying corner cases we’ve come across, but let’s not go into them all right now. This post is long enough.

Also, as we noted earlier, the spec makes no requirements as to how the mechanism should be represented to the user. So if a couple of software companies write OSes to behave ‘nicely’ according to the conventions the spec is clearly designed to back, and install EFI boot loaders and define EFI boot manager entries with nice clear names – like, oh say, “Fedora” and “Windows” – they are implicitly relying on the firmware to then give the user some kind of sane interface somewhere relatively discoverable that lets them choose to boot “Windows” or “Fedora”. The more firmwares don’t do a good job of this, the less willing OS engineers will be to rely on the ‘proper’ conventions, and the more likely they’ll be to start rebuilding ugly hacks above the firmware level.

To be fair, we could do somewhat more at the OS level. We could present all those neat efibootmgr capabilities rather more obviously – we can use that ‘don’t respect BootOrder on the next boot, but instead boot this‘ capability, for instance, and have ‘Reboot to Windows’ as an option. It’d be kinda nice if someone looked at exposing all this functionality somewhere more obvious than efibootmgr. Windows 8 systems do use this, to some extent – you can reboot your system to the firmware UI from the Windows 8 settings menus, for instance. But still.

All this is really incredibly frustrating, because UEFI is so close to making things really a lot better. The BIOS approach doesn’t provide any kind of convention or standard for multibooting at all – it has to be handled entirely above the firmware level. We (the industry) could have come up with some sort of convention for handling multiboot, but we never did, so it just became a multiple-decade epic fail, where each operating system came up with its own approach and lots of people wrote their own bootloaders which tried to subsume all the operating systems and all the operating systems and independent bootloaders merrily fought like cats in a sack. I mean, pre-UEFI multibooting is such a clusterf**k it’s not even worth going into, it’s broken sixteen ways from Sunday by definition.

If UEFI – or a spec built on top of it – had just mandated that everybody follow the conventions UEFI carefully establishes, and mandated that firmwares provide a sensible user interface, the win would have been epic. But it doesn’t, so it’s entirely possible that in a UEFI world things will be even worse than they were in the BIOS world. If many more firmwares show up that don’t present a good UI for the UEFI boot manager mechanism, what could happen is that OS vendors give up on the UEFI boot manager mechanism (or decide to support it and alternatives, because choice!) and just reinvent the entire goddamn nightmare of BIOS multibooting on top of UEFI – and we’ll all have to deal with all of that, plus the added complication of the UEFI boot manager layer. You’ll have multiple bootloaders fighting to load multiple operating systems all on top of the whole UEFI boot manager mechanism which is just throwing a whole bunch of other variables into the equation.

This is not a prospect filling the mind of anyone who’s had to think about it with joy.

Still, it’s important to recognize that the sins of UEFI in this area are sins of omission – they are not sins of commission, and they’re not really the result of evil intent on anyone’s part. The entity you should really be angry with if you have an idiotic system firmware that doesn’t give you good access to the UEFI boot manager mechanism is not the UEFI forum, or Microsoft, and it certainly isn’t Fedora and even more certainly isn’t me ;). The entity you should be angry at is your system/motherboard manufacturer and the goddamn incompetents they hired to write the firmware, because the UEFI spec makes it really damn clear to anyone with two brain cells to rub together that it would be a very good idea to provide some kind of useful user interface to the UEFI boot manager, and any firmware which doesn’t do so is crap code by definition. Yes, the UEFI forum should’ve realized that firmware engineers couldn’t code their way out of a goddamned paper bag and just ordered them to do so, but still, it’s ultimately the firmware engineers who should be lined up against the nearest wall.

Wait, we can simplify that. “Any firmware is crap code”. Usually pretty accurate.

Secure Boot

So now we come, finally, to Secure Boot.

Secure Boot is not magic. It’s not complicated. OK, that’s a lie, it’s incredibly complicated, but the theory isn’t very complicated. And no, Secure Boot itself is not evil. I am entirely comfortable stating this as a fact, and you should be too, unless you think GPG is evil.

Secure Boot is defined in chapter 28 of the UEFI spec (2.4a, anyway). It’s actually a pretty clever mechanism. But what it does can be described very, very simply. It says that the firmware can contain a set of signatures, and refuse to run any EFI executable which is not signed with one of those signatures.

That’s it. Well, no, it really isn’t, but that’s a reasonably acceptable simplification. Security is hard, so there are all kinds of wibbly bits to implementing a really secure bootchain using Secure Boot, and mjg59 can tell you all about them, or you can pour another large shot of gin and read the whole of chapter 28. But that’s the basic idea.

Using public key cryptography to verify the integrity of something is hardly a radical or evil concept. Pretty much all Linux distributions depend on it – we sign our packages and have our package managers go AWOOGA AWOOGA if you try to install a package which isn’t signed with one of our keys. This isn’t us being evil, and I don’t think anyone’s ever accused an OS of being evil for using public key cryptographic signing to establish trust in this way. Secure Boot is literally this exact same perfectly widely accepted mechanism, applied to the boot chain. Yet because a bunch of journalists wildly grasped the wrong end of the stick, it’s widely considered to be slightly more evil than Hitler.

Secure Boot, as defined in the UEFI spec, says nothing at all about what the keys the firmware trusts should be, or where they should come from. I’m not going to go into all the goddamn details, because it gets stultifyingly boring and this post is too long already. But the executive summary is that the spec is utterly and entirely about defining a mechanism for doing cryptographic verification of a boot chain. It does not really even consider any kind of icky questions about the policy for doing so. It does nothing evil. It is as flexible as it could reasonably be, and takes care to allow for all the mechanisms involved to be configurable at multiple levels. The word ‘Microsoft’ is not mentioned. It is not in any way, shape, or form a secret agenda for Microsoft’s domination of the world. If you doubt this, at the very bloody least, go and read it. I’ve given you all the necessary pointers. There is literally not a single legitimate reason I can think of for anyone to be angry with the idea “hey, it’d be neat if there was a mechanism for optional cryptographic verification of bootloader code in this firmware specification”. None. Not one.

Secure Boot in the real world

Most of the unhappiness about Secure Boot is not really about Secure Boot the mechanism – whether the people expressing that unhappiness think it is or not – but about specific implementations of Secure Boot in the real world.

The only one we really care about is Secure Boot as it’s implemented on PCs shipped with Microsoft Windows 8 or higher pre-installed.

Microsoft has these things called the Windows Hardware Certification Requirements. There they are. They are not Top Secret, Eyes Only, You Will Be Fed To Bill Gates’ Sharks After Reading – they’re right there on the Internet for anyone to read.

If you want to get cheap volume licenses of Windows from Microsoft to pre-install on your computers and have a nice “reassuring” ‘Microsoft Approved!’ sticker or whatever on the case, you have to comply with these requirements. That’s all the force they have: they are not actually a part of the law of the United States or any other country, whatever some people seem to believe. Bill Gates cannot feed you to his sharks if you sell a PC that doesn’t comply with these requirements, so long as you don’t want a cheap copy of Windows to pre-install and a nice sticker. There is literally no requirement for a PC sold outside the Microsoft licensing program to configure Secure Boot in any particular way, or include Secure Boot at all. A PC that claims to have a UEFI 2.2 or later compliant firmware must implement Secure Boot, but can ship with it configured in literally absolutely any way it pleases (including turned off).

If you’re going to have very loud opinions about Secure Boot, you have zero excuse for not going and reading the Microsoft certification requirements. Right now. I’ll wait. You can search for “Secure Boot” to get to the relevant bit. It starts at “System.Fundamentals.Firmware.UEFISecureBoot”.

You should read it. But here is a summary of what it says.

Computers complying with the requirements must:

  • Ship with Secure Boot turned on (except for servers)
  • Have Microsoft’s key in the list of keys they trust
  • Disable BIOS compatibility mode when Secure Boot is enabled (actually the UEFI spec requires this too, if I read it correctly)
  • Support signature blacklisting

x86 computers complying with the requirements must additionally:

  • Allow a physically present person to disable Secure Boot
  • Allow a physically present person to enable Custom Mode, and modify the list of keys the firmware trusts

ARM computers complying with the requirements must additionally:

  • NOT allow a physically present person to disable Secure Boot
  • NOT allow a physically present person to enable Custom Mode, and modify the list of keys the firmware trusts

Yes. You read that correctly. The Microsoft certification requirements, for x86 machines, explicitly require implementers to give a physically present user complete control over Secure Boot – turn it off, or completely control the list of keys it trusts. Another important note here is that while the certification requirements state that the out-of-the-box list of trusted keys must include Microsoft’s key, they don’t say, for e.g., that it must not include any other keys. The requirements explicitly and intentionally allow for the system to ship with any number of other trusted keys, too.

These requirements aren’t present entirely out of the goodness of Microsoft’s heart, or anything – they’re present in large part because other people explained to Microsoft that if they weren’t present, it’d have a hell of a lawsuit on its hands2 – but they are present. Anyone who actually understands UEFI and Secure Boot cannot possibly read the requirements any other way, they are extremely clear and unambiguous. They both clearly intend to and succeed in ensuring the owner of a certified system has complete control over Secure Boot.

If you have an x86 system that claims to be Windows certified but does not allow you to disable Secure Boot, it is in direct violation of the certification requirements, and you should certainly complain very loudly to someone. If a lot of these systems exist then we clearly have a problem and it might be time for that giant lawsuit, but so far I’m not aware of this being the case. All the x86-based, Windows-certified systems I’ve seen have had the ‘disable Secure Boot’ option in their firmwares.

Now, for ARM machines, the requirements are significantly more evil: they state exactly the opposite, that it must not be possible to disable Secure Boot and it must not be possible for the system owner to change the trusted keys. This is bad and wrong. It makes Microsoft-certified ARM systems into a closed shop. But it’s worth noting it’s no more bad or wrong than most other major ARM platforms. Apple locks down the bootloader on all iDevices, and most Android devices also ship with locked bootloaders.

If you’re planning to buy a Microsoft-certified ARM device, be aware of this, and be aware that you will not be in control of what you can boot on it. If you don’t like this, don’t buy one. But also don’t buy an iDevice, or an Android device with a locked bootloader (you can buy Android devices with unlocked or unlockable bootloaders, still, but you have to do your research).

As far as x86 devices go, though, right now, Microsoft’s certification requirements actually explicitly protect your right to determine what can boot on your system. This is good.


The following are AdamW’s General Recommendations On Managing System Boot, offered with absolutely no guarantees of accuracy, purity or safety.

  • If you can possibly manage it, have one OS per computer. If you need more than one OS, buy more computers, or use virtualization. If you can do this everything is very simple and it doesn’t much matter if you have BIOS or UEFI firmware, or use UEFI-native or BIOS-compatible boot on a UEFI system. Everything will be nice and easy and work. You will whistle as you work, and be kind to children and small animals. All will be sweetness and light. Really, do this.
  • If you absolutely must have more than one OS per computer, at least have one OS per disk. If you’re reasonably comfortable with how BIOS-style booting works and you don’t think you need Secure Boot, it’s pretty reasonable to use BIOS-compatible booting rather than UEFI-style booting in this situation on a UEFI-capable system. You’ll probably have less pain to deal with and you won’t really lose anything. With one OS per disk you can also mix UEFI-native and BIOS-compatible installations.
  • If you absolutely insist on having more than one OS per disk, understand everything written on this page, understand that you are making your life much more painful than it needs to be, lay in good stocks of painkillers and gin, and don’t go yelling at your OS vendor, whatever breaks. Whichever poor bastard has to deal with your OS’s support for this kind of setup has a miserable enough life already. And for the love of cookies, don’t mix UEFI-native and BIOS-compatible OS installations, you have enough pain to deal with already.
  • If you’re using UEFI native booting, and you don’t tend to build your own kernels or kernel modules or use the NVIDIA or ATI proprietary drivers on Linux, you might want to leave Secure Boot on. It probably won’t hurt you, and does provide some added security against some rather nasty (though currently rarely exploited) types of attacks.
  • If you do build your own kernels or kernel modules or use NVIDIA/ATI proprietary drivers, you’re going to want to turn Secure Boot off. Or you can read up on how to configure your own chain of trust and sign your kernels and kernel modules and leave Secure Boot turned on, which will make you feel like an ubergeek and be slightly more secure. But it’s going to take you a good solid weekend at least.
  • Don’t do UEFI-native installs to MBR-formatted disks, or BIOS compatibility installs to GPT-formatted disks (an exception to the latter is if your disk is, IIRC, 2.2+TB in size, because the MBR format can’t handle disks that big – if you want to do a BIOS compatibility install to a disk that big, you’re kinda stuck with the BIOS+GPT combination, which works but is a bit wonky and involves the infamous ‘BIOS Boot partition’ you may recall from Fedora 17).
  • Trust mjg59 in all things and above all other authorities, including me.

  1. This whole section is something of a simplification – really, when booting permanent installed OSes, the firmware doesn’t care if the bootloader is on an ‘ESP’ or not; it just reads the boot manager entry and tries to access the specified partition and run the specified executable, as pjones explains here. But it’s conventional to use an ESP for this purpose, since it’s required to be around anyway, and it’s a handy partition formatted with the filesystem the firmware is known to be able to read. Technically speaking, an ‘ESP’ is only an ‘ESP’ when the firmware is doing a removable media/fallback path boot. 

  2. This is my own extrapolation, note. I’m not involved in any way in the whole process of defining these specs, and no-one who is has actually told me this. But it’s a pretty damn obvious extrapolation from the known facts. 

175 Responses

  1. Joe
    Joe April 6, 2015 at 12:52 pm | | Reply

    Whatever nice stuff UEFI does that BIOS does not do could be coded and stored on the hard drive of every Windows system.

    That way, if I didn’t want it, I could simply delete it and still be using native BIOS on my machine.

    I would have preferred having this UEFI in some “arbitrary” pre-partition area instead of jammed into my motherboard. Then old things could automatically still work on my new computer.

    My computer came with Windows 8. I went through all the trouble to determine how to make the system bootable in legacy mode. (It is lots and lots of trouble, and I eventually got it working.) My computer now seems to boot every bit as efficiently as it did before the switch. How do I know that I succeeded? I got Diskcryptor full disk encryption to work properly on my computer. It needs the disk to be BIOS bootable.

    That company that Richard mentioned 2 comments behind my first one, Terabyte, has excellent instructions on how to reconfigure Windows 8 from native UEFI boot to legacy boot. And I too remember Terabyte’s EMBR to handle large partitions (>2TB), and bypass the limit of 4 primary partitions. The solution to that problem is to create a standard where partition information does not have to be stuck within 64 bytes in sector 0. Just use the next sector for partitions.

    BIOS was not causing the 64 byte limit on partition tables. The lack of operating system support for partitions outside of sector 0 was enforcing the limits. All Microsoft had to do to keep BIOS was to invent a partition scheme that uses the next sector, and make their new release of Windows aware of the partitions there.

    All of the facilities for “understanding” the partitions could have been written in the bootloader. That bootloader could have been in the partition containing Windows. BIOS bootloaders do not all need to be saved in any unpartitioned space except for sector 0. Grub4DOS used sector 0, the PBR of the active partition, and some files in the partition, if my memory serves me right.

  2. Joe
    Joe April 9, 2015 at 3:43 pm | | Reply

    If Microsoft will not allow PC vendors to certify that PCs without UEFI have Windows 8 preinstalled, I take this to mean that UEFI has been absorbed into “Windows”, even if it is an outsourced component from Microsoft’s frame of reference, and even if UEFI is reusable by incorporating it into other systems.

    When I follow a guide to make Windows BIOS bootable, I am removing a Windows component to improve the performance of my PC. The latter is a familiar experience to a lot of people.

    UEFI is not evil, insofar as it is a standard for the behavior of a bootloader. It is bad, at least currently, for it to be on motherboards instead of on hard drives. Being in the firmware, it can abet plans of manufacturers to bind computers to specific operating systems, excluding others.

    Having UEFI in my PC’s firmware does not give me a better sense of security. It gives me a worse one. Bad actors who wrote rootkits used to target the code on hard drives. It was easy to prepare for a recovery from the changes that a rootkit could make by copying the hard drive. The binary backup of the hard drive could be copied back to restore the computer. Now, are the same bad actors going to be induced into finding ways to reflash a victim’s firmware? Rootkits that change firmware would most probably get computers bricked. Maybe this risk could be mitigated if it were easy for users to back up and reflash firmware.

  3. Neill Rutherford
    Neill Rutherford July 31, 2015 at 5:57 am | | Reply

    I do not have a UEFI firmware computer. I have an HP G61 64b machine all the rest are desktops and 32b.

    So my question is regarding using a USB bootable drive in various machines. As I don’t have the new hardware I can not examine the how do i do this myself.

    For the old legacy BIOS boot firmware machines there is little problem. providing one can set boot order and it accepts booting from a USB port otherwise booting from an optical disk via chain-loading might be possible (yeah i have machines that old)

    For UEFI firmware machines

    1) if the machine in question does not have an internal hard drive.
    2) if the machine does have an internal hard drive but would prefer that the internal drive is not accessed in any way.

    Ideally I would want a bootable USB that would work in any machine. I think this should be possible by booting via MBR on BIOS machines and by booting via the UEFI partition on UEFI machines.

    What are you thoughts

    Sorry if my terminology is not correct.


  4. SteveSi
    SteveSi July 31, 2015 at 6:07 am | | Reply

    First, if you use VirtualBox+VMUB you can boot from a USB drive using UEFI in the Virtual Machine. So you can easily test UEFI booting. See http://www.rmprepusb.com – Tutorial #4.
    Next, if the USB drive is FAT32, then you can make it MBR-bootable (normal BIOS) and by placing the .efi boot files on it, UEFI-bootable. e.g. format a USB drive as FAT32, add a bootmgr boot sector (e.g. using RMPrepUSB or bootsect or just format it using Windows – ensure the parition is marked as Active) and then simply copy the contents of a Windows 8.1 64-bit DVD to it.
    To boot in any machine, you would also need to add 32-bit UEFI boot files.
    However, there is a fly in the ointment! Many UEFI systems have a ‘bug’ – if they ‘see’ a USB drive which has both MBR and EFI files on it, they will NOT allow you to MBR-boot from it (only the UEFI-boot option is offered). What this means is that, on these systems, you can never MBR-boot from the USB drive! To MBR-boot, you would have to delete the EFI boot files first – and then it would not UEFI-boot!

  5. Neill Rutherford
    Neill Rutherford July 31, 2015 at 1:45 pm | | Reply


    Thank you both for your replies.

    Just so that you understand where I am coming from I want to create a USB disk or USB disks (One for root / and one for /home)

    Then in an unknown computer (x86, X86-64 and maybe Mac) which has no internal hard disk I want the USB disk to boot.

    To cope with low spec machines I would choose Lubuntu 14.04 LTS 32b. The USB will contain an installed working operating system not a liveUSB.

    Do you see any problems with what I am trying to attempt?

  6. Jenel
    Jenel August 8, 2015 at 7:11 am | | Reply

    I can’t get around this: “With a BIOS firmware, your firmware level ‘boot menu’ is, necessarily, the disks connected to the system at boot time”. What is the boot menu, then? Is it “press F10 to choose boot device”, or is it lilo / grub / “press F8 for safe boot”?

  7. joe jividen
    joe jividen August 20, 2015 at 11:35 pm | | Reply

    This blog post is aimed at regular everyday folks.
    I seem to be the only one you hit.
    Everyone seems to be an IT tech or something.
    I have had a few problems with a hard drive upgrade on a newer windows 8.1 computer with UEFI.
    I bought it for the i-5 4570 processor in an otherwise cheaply furnished package.
    I bought a 2TB SSHD to upgrade the hard drive.
    I, being a regular everyday folk, used a hard disk cloning device to migrate my operating system.
    It seemed to work well for a week or so but then I started to get a warning from HP that my hard drive was failing and I needed to run a bunch of diagnostic tests.
    This would happen at startup after hibernation or an overnight shutdown.
    I ordered another of the same SSHD and shipped the first one back to Amazon.
    The second one acted the same as the first one.
    I tried everything I could think of to fix it but to no avail.
    I then installed it in an older windows 7 computer and it worked fine and is still working fine many months latter.
    I then ordered an SSD that came with a disc to do the software migration.
    It is working fine after many months.
    I noticed that the disk management utility says that I have a healthy EFI partition.
    It used to say there was a UEFI partition.
    HP support assistant has messaged me several times about not having UEFI installed and wants to install it.
    I have refused to install it as I think I could cause the error messages to appear at boot again.
    I am still confused as to why an EFI partition would not be considered a UEFI partition and why HP is bugging me about it.
    I installed windows 10 on my old windows 7 machine yesterday and it got me thinking about how much trouble I could get into installing it on this newer computer with the SSD upgrade.
    Do you think It will cause trouble?
    You article helped me understand why there was a problem with cloning a UEFI hard drive.
    Since UEFI-based computers have bootable information written in their motherboards, you may need to set related hard drive information into your target computer after migrating to a new hard disk. In the contrary, traditional BIOS-based computers don’t need such step: you only need plug a cloned hard drive into a target computer and use it.
    Something is still wopperjawed somewhere or HP would not be bothering me.
    Any ideas on this subject?
    Where do you set related hard drive information into your computer after migrating to a new hard disk?
    Thanks for shooting at me.

    1. maxevan
      maxevan February 23, 2016 at 7:35 am | | Reply

      i have an image of os,full backup

      im notready to deploy(restore) it,yet to the new laptop windows 8.1 uefi,preinstalled

      the image was 7 64 bit,u said u got it working,how???

      n what software u use

  8. Seppe Sol
    Seppe Sol August 24, 2015 at 5:04 pm | | Reply

    The firmware (InsydeH2O) on my Packard Bell easynote TE laptop has no support for Bios compatibility, thus: no VESA, VB2, OpenCL etc.

    The UEFI protocols only reveal one graphic and one text resolution for one screen, a primitive blt protocol without clipping feature, and a framebuffer in PCI space.

    Yet, windows 8 perfectly knows all resolutions of all the connected graphic devices.
    It even knows about the external screen and it’s possibilities.

    I assume that MS (directx?) uses window device drivers to handle graphic devices without Bios support.

    How can UEFI developers obtain similar functionality without Bios support?

    Note: Microsoft’s bootx64.efi takes 1.5Mb.

    Thank you

  9. Victor
    Victor August 27, 2015 at 6:36 pm | | Reply

    Good night!
    I just want to say “THANK YOU” !!!
    This article helped me a lot to get some lights concerning all this mess and misunderstandings boiling around UEFI.
    And yes, i have crapy firmware on my PC.
    I can’t even imagine the time and effort it took you to write this.
    Thanks again and greetings from Portugal 🙂 .
    P.S. Sorry for my English.

  10. Alan
    Alan September 2, 2015 at 8:51 pm | | Reply

    Thanks for the article, it was very informative. I have “crappy” firmware as well. I didn’t fully understand UEFI until I read this article. It was long, but good long 🙂

  11. bm
    bm September 12, 2015 at 4:29 am | | Reply

    i have older pc. it has bios, not graphical uefi. it also has an option to boot from network. is this fact contradicting “In the BIOS world, absolutely all forms of multi-booting are handled above the firmware layer.” or there is second bottom to it? i don’t see any other layer involved in network booting other than selecting this as an option. do i miss anything?

  12. Janusz
    Janusz September 18, 2015 at 11:35 am | | Reply

    Well, thank you for sharing your thoughts.
    I found your recommendation extremely into the point.
    I would appreciate some more technical information regarding:
    UEFI boot manager exact memory location, format and accessibility (by updater or installer) the way of interference with GPT or its backup, in the next version.
    Thank you

  13. Sanjit Keskar
    Sanjit Keskar September 19, 2015 at 11:23 pm | | Reply

    Thanks AdamW. This blog article was TREMENOUSLY useful and enlightening for me

    But may I ask you for a bottom line statement on a query of mine

    I have an acer switch 10 e laptop which has ONLY a UEFI boot (legacy boot not supported and no CSM). Yes it has a Secure boot option BUT THE UEFI BBOT ARCHITECTURE IS 32 BIT ONLY

    I cannot boot a multitude of boot disks that claim to be UEFI bootable (for imaging programs, disk management programs for formatting and disk resizing and data recovery. They of course do boot on my other UEFI boot laptop. This is probably because my uefi is 32 bit only.


    Does the responsibility of booting a bootable disk on 32 bit uefi architecture lie with the software company ? i.e they have to write code for the same? say for example acronis

    Is it possible to modify the iso image (if it is not illegal) by introducing some ready to use files to get such cds to boot on a 32 bit uefi device?

    What is the bootia32.efi? and how is it relevant to my problem?


  14. me
    me September 21, 2015 at 10:44 pm | | Reply

    UEFI boot: how does that shit actually work, then?

  15. Christopher Price
    Christopher Price October 5, 2015 at 2:37 am | | Reply

    Regarding Secure Boot:

    “If you don’t like this, don’t buy one. But also don’t buy an iDevice, or an Android device with a locked bootloader ”

    Secure Boot is disliked because it gave legitimacy to the practices of Apple and a handful of Android device makers. Before that, Microsoft had to sign a settlement agreement for its similar practices against Be, and others in the 1990s.

    Since you wrote this article, Microsoft has given OEMs the ability to revoke the ability to disable Secure Boot on Windows 10 systems. This can make it impossible to tell which machines, in a retail setting, for an average consumer, can/can’t run Linux. Average consumers aren’t going to spend hours researching each PC to know its Linux viability. And worse, they may learn after the fact (once interested in Linux) that they “bought the wrong one.”

    Now the entire PC market is at risk of slowly being locked to the OS that shipped with it.

    You can argue that slippery slope is counterbalanced by a rise of IoT devices, and Android becoming the most popular OS today. Others will argue that it has ensured Linux on the desktop will be owned by Google. Either way, the critics of Secure Boot do have a sound argument… one time has proven.

    The UEFI specification could be modified to require a user setting to disable it. And OS vendors could require Secure Boot to boot their kernel. That would mean Windows 10 in a datacenter could remain secure, while home PCs remain open. The question is, if the UEFI group has the guts to stay open… or not.

  16. Gordon Myers
    Gordon Myers October 7, 2015 at 8:56 am | | Reply

    I just want to say that I, too, found this article immensely helpful and instructive, and am so grateful that you wrote it.

  17. Joe
    Joe October 11, 2015 at 7:16 am | | Reply

    Hi. I would like the UEFI specification to require something else, besides the the ability to use it without Secure Boot. I would like the CSM mode to be an essential feature of a UEFI implementation.

  18. Patty P
    Patty P October 16, 2015 at 7:41 pm | | Reply

    I liked the part where he said UEFI

  19. Patty P
    Patty P October 16, 2015 at 7:42 pm | | Reply

    (Amazing article by the way)

  20. Kelly K
    Kelly K October 18, 2015 at 12:17 am | | Reply

    I’m a self-pronounced ignorant computer nerd (wanna-be) who, while on my way to gathering fragments of information on how to build a mini-itx, just happens to stumble on to this article–I mean essay. I’m more than thrilled that this wasn’t going to be short and snappy reading. After having wandered through so many sites of informatively un-selfexplanatory information, I’m more than eager to pull up a chair to the very front of this long, refreshingly elaborative class. I don’t know enough about bios or uefis right now to really join in the passionate arguments/complaints/debates about whose computer has what inside and what their anatomy is called. After having read this essay (and still reading it..and will be reading it again..and again), I would like to raise my hand and say– that this is the BEST, MOST INFORMATIVE, MOST ENTERTAININGLY CONDESCENDING DETAILED thing I’ve had the pleasure of reading by far! If there’s a place I can go to nominate you, AdamW, as the MOST OUTSTANDING bootloading essayist-speaker-writer-instructor OF THE YEAR and year after this, I would be one of your biggest supporters. Thank you.. that’s all I wanna comment on right now. And if you’ll please excuse me– I would like to get back to reading this immensely instructional article–I mean essay.

  21. Jeremy Fields
    Jeremy Fields October 23, 2015 at 3:09 pm | | Reply

    Really excellent post. UEFI to me is now a lot more likeable. I’d ask for an quick foray into PXE booting, but the article is already massive. Thanks for writing!

  22. pgmer6809
    pgmer6809 October 27, 2015 at 4:39 pm | | Reply

    Can anyone explain why after all this time the Linux foundation, (or Red Hat, or …) have not come up with their own key and lobbied the major Mobo makers and PC vendors to include this key alongside the Microsoft key?
    That way there would be at least one other entity besides MS that could ‘sign’ bootloaders.
    (Very well written article BTW)

  23. pgmer6809
    pgmer6809 October 27, 2015 at 4:42 pm | | Reply

    I don’t think you approve of this configuration but I run one machine with a GPT disk that boots in BIOS compatibility mode.
    I use it to test Linux distros. I have about 16 partitions on it (and counting) at the momment, one per distro. No ESP.
    Grub has the ability to define a ‘extra grub code partition’ on GPT disks that make all the problems with ‘magic space’ go away.
    Thanks to GRUB and OSprober I do not have a problem booting multiple OS’s from this one GPT disk. And I can create as many partitions as I want without worrying about Logical, Extended etc. etc.

  24. Julian
    Julian November 18, 2015 at 5:39 pm | | Reply

    I have new PC, which I assembled myself: Asus motherboard, which during startup displays UEFI BIOS, 8 core AMD processor, 250 GB SSHD, extended partition on my 2TB SATA drive and two partitions drives – E and F. I run Win 7 pro 64 and everything was fine. I’ve did upgrade to Win 10 and everything was fine until Nov Win 10 update. After rebooting my drives E and F disappeared in fact there was no SATA drive at all in device manager ??? Why? Any light in the darkness wise guys?
    I was able one time restore my machine to pre update state but Windows installed updates and again no HD. I had huge troubles to return to Win 7. For some magic power it finally happened and I run Win 7 again.
    I am thankful for sharing your knowledge.

    1. Michael C.
      Michael C. July 26, 2016 at 9:54 am | | Reply

      Julian you made me laugh (thanks); I too prefer Win 7 Pro; Short long story, my Toshiba crashed, after installing new board and HD, that too crashed after one month usage, techy friend advised it was an inherent problem of Toshiba units with AMD CPU (?); I purchased new unit with Win 10 installed (nobody wanted to sell me new unit with Win 7 of any kind)sooo, I purchased complete full blown Win 7 Pro install disks for new PC’s, I yelled, bitched, almost threw the unit under my car until another friend said it’s new PC with newer motherboard; I finally accessed the UEFI, disabled it and finally installed my Win 7 Pro; I’m still leery of the MS updates, but now I’m armed, just running out of knowledge.

  25. sixpack
    sixpack December 1, 2015 at 9:09 am | | Reply

    Very interesting article, though it does take a couple of reads – at least for me it does!!

    To go on a tangent, MS insisting on the x86 chip architecture (plus now ARM) is perhaps more harmful to innovation and development than it’s o/s requirements.

    There is little room for new chip architectures which could – and are likely to – provide significant benefits to the rather old x86 one.

    Now, there would be extra costs for MS but then they aren’t poor and don’t give out dividends so I’m less sympathetic to them. Also Intel has benefited from the scale of production that this restriction enables which in turn should benefit the consumer (prices) although prices are very high for chips it seems.

    I ran out of knowledge a while back so I’ll stop here!

  26. Tim
    Tim December 8, 2015 at 2:04 am | | Reply

    Very interesting how the author has not made a peep since Microsoft has changed their position on the disable secure boot feature. SO like its some big surprise secure boot now is no longer required either by the UEFI or MS sert to allow secure boot to have a disable feature. You can damn well be sure MS further pressures or offers some sort of kick back for the feature to be locked.

    So what happens when a manf under pressure from MS you know the trillion dollar company locks its secure boot with only the MS license in the key ring? That’s right no other OS can be loaded unless you hack the firmware. At the very least the Secure boot should have been open to allow user entered keys but that too is not a mandate. All the heat about Secure boot from those of us who understand it was never about is basic workings. Those are all very good the issue was how MS was using its market share to bully requirements. Your artilce reads like MS is some sort of jonny be good misunderstood good guy. Please. MS had orignally tried to have the secureboot locked with only its key from the get go under its cert but it got so much backlash from other OS manf such as RedHat and customers as well as HW manf its relented and made itself look good by including the disbale feature in its mandate. It has always wanted that locked. If you are going to aruge this is not true give one good reason why it would not be in MS best interested to have a locked secureboot? There are none plain and simple.

    Not to mention look what we have now with Windows 10. All home and even paid pro users have become nothing but beta tester group for the big dollar Enterprise group. Now they have laxed their testing to barely alpha level before release. See how it fails in the wild then patch the patch and once its solid send it to enterprise. That is what you get when you accept MS giving you an OS as a service. Really they mean service them. They make their money from OEM cert for the home and pro so you have no weight to your voice at all anymore other than to stop using them.

  27. Rogerio Hilbert
    Rogerio Hilbert December 22, 2015 at 7:01 am | | Reply

    I was wondering about the beginning of the article in the terminology section when it says: “Please don’t ever say ‘UEFI BIOS’”. I’ve been seeing quite a lot that terminology everywhere, including the title of the UEFI Utility Interfaces, like below:


    It doesn’t seem to be wrong, does it?

  28. Pugly
    Pugly February 19, 2016 at 4:03 pm | | Reply

    In 2015 i helped my father in law buy a laptop. We bought one under the premise i would nuke the pre-installed win8 and go with win7. Turned out the oem had removed the ability to turn off secure boot from the firmware. There was no way to tell this from either the internet or the packaging. The online help from the oem had screenshots showing how you could simply turn off secure boot from the firmware menu when infact this menu item infact no longer existed.
    There should be a clear warning/notice in the product description if secure boot is forever on. It limits the device in a way that was not typical of pcs up till now.

  29. Jacob Burroughs
    Jacob Burroughs March 9, 2016 at 6:07 pm | | Reply

    I enjoyed reading this article. Having read this article after spending several hours one night making secure boot, Windows, and Fedora (later switched to Ubuntu because reasons, but not really relevant to this comment) off a single laptop SSD, I will say that might life would have been a lot easier had I followed basically any of those last points. That said, where would be the fun in doing things the easy way? I therefore want to point out rEFInd, which I don’t know if you are familiar with. It offers a nice interface for UEFI multi-booting, and supports using Secure Booth through shim, and chain-loading another bootloader and/or detecting Linux kernels. Once setup once, it is actually nice and painless to use, but I spent way too long getting it set up. Of course, the second time I had to do it, it was much easier since I had done it once, but that doesn’t make it any more user-friendly.

    Also, on that note, I particularly liked your line “Or you can read up on how to configure your own chain of trust and sign your kernels and kernel modules and leave Secure Boot turned on, which will make you feel like an ubergeek and be slightly more secure.” since that more or less reflects my feelings, even if I am currently not building my own kernel. (Is there a good reason I might someday want to experiment with doing that?)

  30. Srj
    Srj March 17, 2016 at 7:07 pm | | Reply

    When I tried efibootmgr in installed ubuntu OS along with Win10 in UEFI mode, a message appears stating that “efivar is missing” and all. They also suggest me to trick madprob . So please let me know what should be done if efibootmgr shows some troubles.

    LINSEY TIRADO May 10, 2016 at 10:46 pm | | Reply

    Helpful writing , With reference to which , if one requires to merge some PDF files , my boss ran across article here https://disqus.com/by/rest04plate/.

  32. Fred J. Tydeman
    Fred J. Tydeman May 19, 2016 at 9:31 pm | | Reply

    On a Fedora 23 system, as root, I enter:
    efibootmgr -t 15
    and the timeout changes as expected.
    But, when I enter any of:
    efibootmgr -b 0001 -L FedoraSSD
    efibootmgr -b 1 -L FedoraSSD
    efibootmgr -v -b 1 –label FedoraSSD
    nothing happens. I expected the name on the boot menu to change.

  33. andreino
    andreino May 23, 2016 at 5:17 am | | Reply

    state that I am newbie, so have a lot of patience, I installed arch sun an external drive gpt-UEFI I used systemd-boot and efibootmgr and I added the entries, and everything works.
    Now I have a problem on the same disk I installed another distro archmate, and I can not figure out if it is possible to start the distro dall’entries I created and if I may kindly indicate the steps.
    thank you

  34. andreino
    andreino May 23, 2016 at 5:19 am | | Reply

    [nuovo@pippo ~]$ ls -l /boot
    totale 26836
    drwxr-xr-x 4 root root 4096 22 mag 17.54 EFI
    -rwxr-xr-x 1 root root 18629478 23 mag 10.35 initramfs-linux-fallback.img
    -rwxr-xr-x 1 root root 3678073 23 mag 10.35 initramfs-linux.img
    -rwxr-xr-x 1 root root 692736 18 gen 18.37 intel-ucode.img
    drwxr-xr-x 3 root root 4096 22 mag 16.52 loader
    -rwxr-xr-x 1 root root 4463456 11 mag 22.23 vmlinuz-linux
    [nuovo@pippo ~]$ ls -l /boot/EFI/
    totale 8
    drwxr-xr-x 2 root root 4096 22 mag 17.54 Boot
    drwxr-xr-x 2 root root 4096 22 mag 17.54 systemd
    [nuovo@pippo ~]$ ls -l /boot/loader/entries/
    totale 4
    -rwxr-xr-x 1 root root 180 22 mag 17.42 arch.conf
    [nuovo@pippo ~]$ paeted -l
    bash: paeted: comando non trovato
    [nuovo@pippo ~]$ parted -l
    [nuovo@pippo ~]$ sudo parted -l
    Modello: ATA TOSHIBA MQ01ABD0 (scsi)
    Disco /dev/sda: 750GB
    Dimensione del settore (logica/fisica): 512B/4096B
    Tabella delle partizioni: gpt
    Flag del disco:

    Numero Inizio Fine Dimensione File system Nome Flag
    1 1049kB 420MB 419MB ntfs Basic data partition nascosta, diag
    2 420MB 693MB 273MB fat32 EFI system partition avvio, esp
    3 693MB 827MB 134MB Microsoft reserved partition msftres
    4 827MB 652GB 651GB ntfs Basic data partition msftdata
    5 652GB 729GB 77,3GB ntfs Basic data partition msftdata
    6 729GB 730GB 895MB ntfs nascosta, diag
    7 730GB 731GB 510MB ntfs nascosta, diag
    8 731GB 731GB 472MB ntfs nascosta, diag
    9 731GB 750GB 18,8GB ntfs Basic data partition nascosta, msftdata

    Modello: TOSHIBA MK5075GSX (scsi)
    Disco /dev/sdb: 500GB
    Dimensione del settore (logica/fisica): 512B/512B
    Tabella delle partizioni: gpt
    Flag del disco:

    Numero Inizio Fine Dimensione File system Nome Flag
    1 1049kB 634MB 633MB fat32 avvio, esp
    2 634MB 19,6GB 19,0GB ext4
    3 19,6GB 381GB 361GB ntfs Basic data partition msftdata
    4 381GB 467GB 86,0GB ntfs msftdata
    5 467GB 480GB 12,8GB ext4

    [nuovo@pippo ~]$
    sdc1 archlinux
    sdc5 archmate

  35. andreino
    andreino May 26, 2016 at 8:46 am | | Reply

    i solved

  36. Joshua
    Joshua July 18, 2016 at 10:04 am | | Reply

    It’s long and a bit wordy, but good stuff. The advice is sound. Thanks!

  37. Dhruv
    Dhruv July 22, 2016 at 3:03 pm | | Reply

    I came across this thread while searching for a solution to the problem am facing right now.
    When I turn on my laptop Dell Inspiron 15 win 8.1, the OS is not loading and the system is stuck at the Aptio setup utility page.Can anyone help me fix this..??
    P.S – I am a total noob whwn it comes to computers.

  38. poke49152
    poke49152 July 24, 2016 at 3:30 am | | Reply

    UEFI – why to do it simple if you can mess it with old system so that nothing works than anymore.
    I had issue on linux, when system didnt recognized a disk, then there was some legacy or something like this setting, and it worked by mistake, but in next version probably wont.
    Also we se theres problem with standard backup .

    So no matter how many payed bullshit is put in this site, nobody cantr escape from simple fact – UEFI is just another corporate scam to prevet you of using older software and hardware, and to by their new bullshitn they sell now regulary every month, usualy every version more stupid and more unusable and with less concern of users privacy.

  39. amazing
    amazing July 24, 2016 at 9:52 am | | Reply

    I stumbled upon this blog and I just wanted to inform you how pompous and ignorant you are:
    “You do not have a ‘UEFI BIOS’. No-one has a ‘UEFI BIOS’. Please don’t ever say ‘UEFI BIOS’”

    You barely know what firmware is. You have a very weak grasp of EE and chips. And yet you don’t have any problem making these kinds of grandiose statements. That’s amazing. I don’t have much EE knowledge (but certainly more than you) and I’ve worked closely developing software drivers for chips.

    If ASUS calls its firmware “UEFI BIOS” then it is called UEFI BIOS. If you think otherwise then you’re basically saying that Microsoft doesn’t know what Windows is and it is really called dos. Or linux doesn’t know what it is talking about and there’s no such thing as “linux kernel” – it’s always linux.

    The fact that you can’t make the distinction doesn’t make your words fact.

    In fact here’s an Intel glossary mentioning an “EFI BIOS”:

    And the definition from that page of BIOS/SMBIOS/System BIOS:
    “BIOS – Basic Input/Output System is the firmware for a computer whose main function is to identify and initialize various motherboard components as well as to load and transfer control to a small program that then loads the operating system.”

    Also a cursory search on google shows both ASUS and GigaByte say things like “UEFI BIOS” – both online and in manuals.

    Basically the absolute opposite of what you were certain of is correct.

    Now I don’t think you’re a bad guy or that it’s bad to be wrong. But you should have some humility when speaking about things you don’t know anything about.

    And I don’t even care what Wikipedia or the UEFI organization say because it doesn’t matter. If the chip and board manufacturer/integrators say that it is X, then it is X. End of story.

  40. Somalia Pirate
    Somalia Pirate August 4, 2016 at 8:46 pm | | Reply

    In the “UEFI native booting: how it actually works – boot manager entries” section where you say “What does these entries actually mean, though?” should be “What do these entries actually mean, though?”

  41. Chris
    Chris August 24, 2016 at 9:03 am | | Reply


    Thanks. Great! article. Now I understand how UEFI works better. Maybe I can help out here. First. Any idea of UEFI BIOS is dreck. Plain and simple. No matter who says what. As one said above here BIOS was not the reason for memory limit here. The real reason was the hardware addressing limits caused by the 32-bit word registers used in the memory addresses. Take a simple read in the MS A+ textbook and you will see the initial limit was dealt with in the concept of HighMEM.

    I was surprised to see the Intel actually developed this as can be seen on this site;


    It was done to address the constraints against multi-core, multi-thread CPU’s. UEFI REPLACES BIOS, but the compatibilty has to remain.

    These are just the correct facts of the case. Right now I am busy changing over my Lenovo Windows 8 laptop to Gentoo Linux. The incessant crashes and involuntary OneKey Recoveries finally got to me. I stumbled over your site to make sure I do not destroy the LT.

    Funny thing. The MBR always baffled me since I never twigged to the unformatted space in front of the first partition where the rest of it was written.

    Conditions now.
    My Gentoo livecd is iso’d, but boots up ONLY when UEFI goes AFTER Legacy Boot. Otherwise, with Secure Boot Disabled, it still boots into Windows.
    I want to strip Win 8 completely, last update was more than a year ago when the forced 8.1 update crashed everything. No time for back ups. Not even manual. Took complete control. Much as people said here, I do not want to be involved in Win 10.

    fdisk -l show it is a gpt disc.
    /dev/sda1 1G Win recovery
    /dev/sda2 260M EFI System
    /dev/sda3 1G Lenovo boot
    /dev/sda4 128M MS reserved
    /dev/sda5 884G MS data
    /dev/sda6 25G MS data
    /dev/sda7 20G Win recovery

    It seems I can keep /sda2 for future use as you said here. Correct?
    (I think I wll partition manually).
    With Linux cp I sould also be able to save /sda3.
    Previously I wanted to dual install Windows and Linux (on BIOS XP), but the reigning wisdom was that you had to install Windows first then Linux ot=r get wioped out. Is this still the situation with UEFI?

    Thanks again, this is very helpful.

  42. Tim Gatton
    Tim Gatton August 30, 2016 at 6:33 am | | Reply

    Thanks for the UEFI path explanation … been trying for 2 days via the DELL web site (my OEM) and was getting no where.

  43. OK
    OK September 13, 2016 at 4:14 am | | Reply

    Such a douchey way of writing an article.

  44. Ef
    Ef September 28, 2016 at 6:55 pm | | Reply

    I too believe that words should be explicit rather than customary. Just because many use a phrase like “UEFI BIOS” doesn’t excuse that it is misleading and confusing if you don’t already know what is being referenced. My pet peeve is “dark matter”. Two things about dark matter, it isn’t dark (it’s clear) and it isn’t matter (it has a mass property but no other form characteristics of matter). But I learned to no longer be upset when someone says dark matter. I’ll never say ‘dark matter’ or ‘UEFI BIOS’. When I hear them, it tells me that the speaker or writer is lazy, misinformed or doesn’t actually understand what they are talking about.

    Thanks for the UEFI article. Very helpful. Although I still can’t see how to stop Windows from changing the EFI settings every time it runs. I figured out how to turn off ‘recoveryenabled’. But somehow the Windows Boot Loader always gets reinserted first in the fwbootmgr settings. Maybe it’s the firmware doing it. I seemed to have learned that from this article.

  45. Profff
    Profff October 3, 2016 at 1:07 pm | | Reply

    why does my laptop bott to windows 10 quicker via a UEFI boot and GPT partition?

  46. Tom Hale
    Tom Hale October 14, 2016 at 12:06 am | | Reply

    Great article. One thing to fix: “what it’ll really likely do add is configure”

  47. HAAbackwater Bumpkin
    HAAbackwater Bumpkin October 23, 2016 at 11:54 pm | | Reply

    Thanks AdamW! I’m also a pedandict podunk and while this whole computer business is completely beyond my simplistic nature and etc , you’ve truly explained things in a way me and that other pleb could grasp 🙂

    I have a couple other minor clarifications and I’d really appreciate it if you had another moment to offer some of your information.

    1.) please tell me if I’m understanding correctly that the manufacturer has mislabeled the updated firmware as bios on a newer Dell Inspiron and whether it does me any good to attempt to “re flash” it again and again. I’ve done this many times and this blasted malware just returns.

    2.) do I also hear you say that the MALICIOUS code is contained within the firmware and/or the media I’m try to use to fix the problems, and which would be the better scenario and more likely for a guy like me to actually pull off? I’ve heard it is possible to modify an ISO or image file but I hadn’t considered that you might ever attempt to fix the firmware itself.

    3) (last one) is this a situation that is better dealt with while an operating system is installed on a permanent disk or better handled with the disk removed using a live cd?

    Please excuse me my backwards and ordinary ways and let me assure you that not in all my years of blindly meandering through YouTube tutorials that this is a wonderful explanation of how UEFI differs from bios and what it actually does. Maybe you should keep at this writing stuff especially because it’s a real treat to read. 👌

  48. Azix
    Azix October 27, 2016 at 6:24 am | | Reply

    So UEFI is a kind of BIOS?

  49. ryan
    ryan November 1, 2016 at 4:02 am | | Reply

    link to uefi spec requires login, fyi

  50. Vis
    Vis November 2, 2016 at 1:28 pm | | Reply

    Good read. Have one question. I understand every firmware could have their own implementation, but what is the expected or general behavior if there are no boot entries in NVRAM, but the ESP have kernel directories and bootloaders present.

    I tried this experiment in an ubuntu system.

    Created 2 directories inside the boot partition.


    Deleted the boot entries from NVRAM and did a power cycle.

    When the system came back up, could see Ubuntu entries in efibootmgr -v and not fedora. Am curios to know how figured out one entry and not another. (There is no fedora entry in grub.cfg and only Ubuntu, but i believe that is immaterial to create the boot entry)


    1. Vis
      Vis November 2, 2016 at 2:02 pm | | Reply

      I could get the firmware create the fedora entry, by having a shim.efi file inside \EFI\fedora. When i created another directory say vis (\EFI\vis\, with a bootloader file grubx64.efi and shimx64.efi, firmware doesnt create though. What file does firmware expect to create a boot entry.

Leave a Reply

Your email address will not be published. Required fields are marked *